quickone87
New member
just recently installed a new camoplast cobra track 8 tooth drivers new hyfaxs and am going to be installing studs later. i finally got everything in place tonight. get the rear suspension bolted up and what do you know the track hits on the tunnel protectors and the front heat exchanger. NOW what do i do . i was told i shouldnt haft to remove those . Is this true or should i rip all that crap out and go bare bones on the belly!!! The sled is a 01 sxr 700. There calling for 6-10 inchs hear on top on the 7 thats down now and my sled has been in peaces for 2 months now. IM NOT A HAPPY CAMPER 
What size lug is it? Must be close to 2" if you have 8 tooth drivers and it hits.
quickone87
New member
its a 1.352 lug
got to trim the lugs the lugs are to tall
I ran a 1.4 in my viper with 8 tooth drivers, and it wasn't even close. I hate to ask, did you count the drivers. Maxdlx
quickone87
New member
counted the drivers and they are a 8 tooth driver i can free spin the track and its barely hits on the top side of the tunnel protector and barely rubs on the front heat exchanger protector.