jabber800
New member
Bob that sled didn,t happen to come from NorthBay did it?? There is one that ran NBSSR with that exact set up.. Ran very good compared to stock...
bufalobob
Member
jabber800:
i built the sled & did go to north bay a lot & race. it's red w/ white graphics. there are pictures of it on radarruns.com
bob
i built the sled & did go to north bay a lot & race. it's red w/ white graphics. there are pictures of it on radarruns.com
bob
jabber800
New member
Sorry Bob, I know you have been to the Bay and I have seen your results.. Very good by the way.. The sled I'm asking about is the f-1000 you saw dynoed.. There was one out the last two NBSSR events with the same mods as you mentioned..
bufalobob
Member
these guys don't go to canada.
how fast did he go.
bob
how fast did he go.
bob
jabber800
New member
Trail track and studs ran around 120 MPH on a relatively slow day. Most of the stock f-1000's where having trouble getting into the 110's
bufalobob
Member
+10 mph for under $1000. that's a lot of bang for the buck!
now the down side - no counter balance shaft. vibrates worse than a sick harley.
bob
now the down side - no counter balance shaft. vibrates worse than a sick harley.
bob
jabber800
New member
Can you say clutch and crank parts!!!! Been there done that!!!
bufalobob
Member
dyno sheets are now posted. click on the link below. subscriber side.
http://www.dynotechresearch.com/index.htm
bob
http://www.dynotechresearch.com/index.htm
bob