proper cleaning of an srx head after detonation

Rambunctious

New member
Joined
Apr 19, 2004
Messages
371
Location
Holland, Michigan
I burned down a cylinder after 5900 flawless miles because a spark plug was loose and it leaned down
I am in the process of a full rebuild to do it right

concerning the head. there are alum specs from the detonation

how can you properly clean it up without scratching any coating ( if any)
is it ok after clean up, or is a new head required
do they have an annodize finish or anything?

thanks

Ramb
 
chuck it up in a lathe and either use sand paper to smooth it out or do a light cut if need be, there is no coating on the head, just bare aluminum. Dont use muratic acid as it will eat the aluminum, thats what you use on the cylinder plating to remove the molten/smeared aluminum.
 
thanks


is there value in my jug that has smeared :) aluminum? if it can get cleaned up?
I already bought al ow mileage jug and matching piston.
but if someome can use my other jug that would be good to know

fourbarrel, what you asking for your head if I need it

Ramb
 


Back
Top