Ultimax
Member
I am installing the Wahl Bros. no-slip drivers on my 2000 MMax. Does anyone have the measurements for the spacing on the shaft? Wahl Bros. suggests putting the shaft in without the drivers installed and measure from the center of the shaft to the drive windows in the track for proper spacing. It would save me a lot of work if someone has already done this and has the proper spacing for these drivers. Thanks.
I can only help you with the stock location from the Yamaha Tech Manual.
Ultimax
Member
Thanks for the offer, but I have those measurements on file already. Hopefully someone will reply with information on these drivers. Thanks.