hi guys.i took my sled out of storage today to begin my restoration project and i have a few questions.first has any one bought-used a moly front end from cb perf?2nd last year i rebuilt my motor with all oem parts and now need to do the clutches,any suggestions?and lastly is the stock jetting on a 98 srx pretty good or factory rich like my old sled.and lastly what track do most of you like?thanks the sled has 1300 miles on it but sat for 7 yrs thats while i went thru the motor.the track looks to be dry rotted.
7 year rebuild ?? still remember how to ride ? j/k congrads ....stock jetting is a little rich on a stock motor ...clutch has low miles just clean very good ..check for groves were belt rides in clutch at idle and look for cracks rest shoould be ok ....if track is stock ya it is probaly shot or will be soon ...
yea i guess i didnt properly explain.i bought this sled last winter from a widow hows husband died 8 yrs ago.thus ,it sat in there garage for 7 years.the gas IS on the left right?the track is bone stock however.intresting note,when i removed the crank seals they just fell off the ends of the crank!i think from sitting they to were rotted!
no the gas is in the tank.....lol ....i have 3 98`s and have had no problems ...have you found out if the crank mod was done ? if not done i would have it done or dont stud the track ....ya stock track were junk if it has sat that long my guess a few good launches and you will start ripping out windows ....i riped out about 10 on mine and 6 were in a row ...hacksaw 1 1/4 or 1 inch cant remember which ...works good on these sleds ....