valin
Active member
Ya, I didn't figure that width would be an issue. I think height will be a bit of an issue, though. You're gonna have to throw this up in the working log!
Yamidude59
New member
How is the build going?
Gorkon
New member
I just picked apart my 06 Attak for parts last weekend and was tinkering on my SRX the next day. So I have EVERYTHING, including the knowledge that you're in for some serious obstacles to overcome.
I have seen a V-Max 4 with an RX-1 engine in, turboed! So, it can be done. Of course just about anything 'can' be done, the question is though, do the ends justify the means?
For one thing, be aware of the differences between the carb motor and the fuelie. The fuelie motor will need to be stood up to run carbs, otherwise the floats in the carbs just won't work. Personally, I'd run the injection, I'd also think about using the 4 stroke bulkhead because of the way motor mounts work. Have fun, let me know if you want any parts, my ad hits the local paper tommorrow. Best. G.
I have seen a V-Max 4 with an RX-1 engine in, turboed! So, it can be done. Of course just about anything 'can' be done, the question is though, do the ends justify the means?
For one thing, be aware of the differences between the carb motor and the fuelie. The fuelie motor will need to be stood up to run carbs, otherwise the floats in the carbs just won't work. Personally, I'd run the injection, I'd also think about using the 4 stroke bulkhead because of the way motor mounts work. Have fun, let me know if you want any parts, my ad hits the local paper tommorrow. Best. G.
bravo-guy
New member
just to let you know, IT CAN BE DONE......... Go for it my son, if you do this, you will have a rocket!!!