waynemags
New member
hey guys. just pulled all the jets.
PTO: main 135,,,pilot 60,,,air screw 1 1/2 turns
middle: main 135,,,pilot 60,,,air same
mag: main 135,,,pilot 60,,,air same.
This will be riding mostly at between 1000 and 3500 feet. at an average temp about -15 to -25 deg celsius.
any ideas on where to start?
PTO: main 135,,,pilot 60,,,air screw 1 1/2 turns
middle: main 135,,,pilot 60,,,air same
mag: main 135,,,pilot 60,,,air same.
This will be riding mostly at between 1000 and 3500 feet. at an average temp about -15 to -25 deg celsius.
any ideas on where to start?
Turk
TY TECH ADVISER
- Joined
- May 2, 2003
- Messages
- 2,806
That is jetting for 6k+ elevation
You want
42.5 pilots
146.3/146.3/148.8 mains
needles at # 3 position
fuel screws out 1 1/8 turns.
You want
42.5 pilots
146.3/146.3/148.8 mains
needles at # 3 position
fuel screws out 1 1/8 turns.
waynemags
New member
reply
why so small on the pilot.also which is typically 1, 2, and 3.pto,centre,mag, or reverse
why so small on the pilot.also which is typically 1, 2, and 3.pto,centre,mag, or reverse