jet101ski
New member
Does any body have the specs on Ring end gap and pistion side clearance? For a stock 99 MountainMax.
Last edited:
mopar1rules
Active member
if i recall (without looking at the manual), it should be around .012". rule of thumb is .003"-.004" per every 1" of bore.
jet101ski
New member
Does anybody have the piston the side clearance? And what is the stock compression Supose to be?
Last edited:
mopar1rules
Active member
piston to cylinder clearance, manual says .0028"-.0030" and the compression should be around 120-125 on all 3 i would think.