marcush
New member
- Joined
- Dec 24, 2003
- Messages
- 100
Hi guy's and girls
I have purchased a head for a 700 mm that has been cut and chambers reshaped to accomdate cylinders which are ported. The porting is the same as race logic. The squish is now .095" ,stock is around .065. Will this pose a problem of any kind? Compression is 135psi with all three layers of gasket.
I have purchased a head for a 700 mm that has been cut and chambers reshaped to accomdate cylinders which are ported. The porting is the same as race logic. The squish is now .095" ,stock is around .065. Will this pose a problem of any kind? Compression is 135psi with all three layers of gasket.