swmichsx
New member
i have a 97 sx 700 with simons cpr pipes and vforce reeds. fresh set of stock bore pistons and a stock clutch. anyone got a good pilot jet, main jet and needle set up that will get me close? 
JohnnyQuest
Member
148.8 mains
47.5 pilots
needles stock 3rd groove
fuel screws out 2.0 turns
That's what I have ran for 5 years in mine. Maybe richen up the needles a notch if you ride extreme temps a lot
47.5 pilots
needles stock 3rd groove
fuel screws out 2.0 turns
That's what I have ran for 5 years in mine. Maybe richen up the needles a notch if you ride extreme temps a lot
swmichsx
New member
thanks man
JohnnyQuest
Member
You got it! Do you have your clutching all dialed also with the pipes? 
swmichsx
New member
no, any suggestions? they would be greatly appreciated.
JohnnyQuest
Member
Stock weights 4.5g inner, 3.1g outer, 51/43 helix, stock springs should get you close