Trailman
New member
Enticer/Excel III driven sprocket question
I have installed a new track on my 1987 340 Excel III.
I fitted the spacer on the track drive shaft, then fitted the driven sprocket but noted that the splines on the drive shaft are sticking out approximately 3/16", I don't see any other spacers in my box of parts other than the flat washer and lock washer and bolt for the end of the shaft.
The driven sprocket has free play side to side.
My question is when refitting the driven sprocket is side play normal?
Thanks for any replies, just want to make sure I got it right.
I have installed a new track on my 1987 340 Excel III.
I fitted the spacer on the track drive shaft, then fitted the driven sprocket but noted that the splines on the drive shaft are sticking out approximately 3/16", I don't see any other spacers in my box of parts other than the flat washer and lock washer and bolt for the end of the shaft.
The driven sprocket has free play side to side.
My question is when refitting the driven sprocket is side play normal?
Thanks for any replies, just want to make sure I got it right.
Last edited:
Trailman
New member
Well to answer my own question, I phoned the dealer and he said the side play in the driven sprocket was normal.
I really should pay more attention before taken things apart, now to put the skid back in
I really should pay more attention before taken things apart, now to put the skid back in