cougar1985
New member
Will the skid out of a 2000 800 xcr extra 10 fit the 94 vmax?Wish i had acess to stuff like a lot of you guys do sure sucks sometimes living in the boonies.Hopefully this will be the last question about what will work ,maybe next will be how to do,lol.
daman
New member
off topic,,
how's the old girl running since you got jetting dialed in,get many miles in since then?
how's the old girl running since you got jetting dialed in,get many miles in since then?
cougar1985
New member
The old girl runs great,couldnt be more pleased,also i just bought a extra -10 suspension for her so my butt and back should be thankful also!!
daman
New member
Good to hear,,yea that new skid should help..good luck!!!!
sandmanmike1
New member
Do you have access to the donor sled? Start from the drive axle and be sure to have all measurements dead on. Measure toward back of sled and from the top. I had my dad use a punch once I located hole position. I used a square and speed square when i took my measurements. A 1/4 inch off can cause a bind up with suspension.
horkn
New member
That xtra 10 will work great in the vmax.
Post up when you get it in and get some miles on it.
I'm going ridingfor the first time this season for 4 days starting Tomorow. WOOOT!
Post up when you get it in and get some miles on it.
I'm going ridingfor the first time this season for 4 days starting Tomorow. WOOOT!
cougar1985
New member
No acess to the donor sled ,its in Illinois or Indiana and im in Canada.I will figure it out it cant really be that hard i hope.
horkn
New member
cougar1985 said:
My 2000 xcsp with xtra 10 has the same tunnel as the 800 xcr your skid came from.
I am going up north to ride, and I will take measurements on where the bolt holes are on the tunnel.
I won't have these measurements until Sunday night, but I will let you know as soon as I can. No wifi at the cottage, and I would rather ride
LOL