linemech31
New member
My buddy has a new belt on his sled and it needs to have the washers taken out because its sqeeking like crazy. I have never done this before could someone walk me through this. Thanks
daman
New member
Remove belt
remove secondary clutch(14mm)pull off
flip secondary over remove the 3 bolts
remove washers from bolts
put bolts back in with out washers
put clutch back in tourqe to 46 ft lbs.
save washers to put back in later when belt wears.
remove secondary clutch(14mm)pull off
flip secondary over remove the 3 bolts
remove washers from bolts
put bolts back in with out washers
put clutch back in tourqe to 46 ft lbs.
save washers to put back in later when belt wears.
linemech31
New member
Thnaks this is a big help.