Just bought a snoscoot 80 for the kids. It has been sitting for the last three years. I cleaned the carb ( smelled like varnish) and cleaned the fuel pump and all fuel lines. It will run and sound great, but when I leave it for more than an hour or more, will not re-start till I prime the cylinder with a little gas. Need help where to look next!!!!
orlo
New member
We have a Scoot also... Check these things'
- Vent line for the tank is clear & not kinked
- Scoots are REAL sensitive to clean jets & settings. You may have to clean it out real good again. There is a Scoot forum online also if you need to get more in-depth.
Good luck.
- Vent line for the tank is clear & not kinked
- Scoots are REAL sensitive to clean jets & settings. You may have to clean it out real good again. There is a Scoot forum online also if you need to get more in-depth.
Good luck.