Hey guys, New here and have some questions... My brother in-law bought an 04 Viper S in the fall and it seems to have a bender power package on it. The problem is every time we go out and ride he gets stopped my the cops for the exhaust. So we want to switch the exhaust back to stock. What else needs to be changed? The guy he bought it from did not give him all of the stock parts back. All we have are 2 clutch springs and a weight... and the stock exhaust. I know it has a bender head, clutch springs ( i am guessing he changed a spring in the primary and secondary since we have 2 totally different springs), I am sure that the jets were changed in the carbs and from what I read on the bender site it also comes with reeds. If we put the stock exhaust back on so he doesn't get anymore tickets what else needs to be changed? Thanks........
mopar1rules
Active member
you'll need to change the clutching back and the jetting. mainly the jetting. you will need 156.3 mains, 45 pilots, 1-7/8 turns on fuel screws, and stock needle w/clip in the middle groove and both shims underneath. while you have to redo the clutching, just put something better in there to begin with.....that's what i would do.
Good news is ....He should get a decent buck for those Bender Tripples on Ebay!!!
Thanks for the advice we were not sure what the stock jets were.
Yeah he is hopping to get enough money for the triple pipes to pay his ticket and get all the parts he needs to go back to stock.......
Yeah he is hopping to get enough money for the triple pipes to pay his ticket and get all the parts he needs to go back to stock.......
jmt31
New member
You should post the ebay address for those pipes...i have on 03 and have been looking for some for awhile.