throttlejocky316
New member
Does a boost bottle really make that big of a difference in power? Is it worth the money?
srx600
New member
boost bottle
I want to know the same exact thing, someone help us out
I want to know the same exact thing, someone help us out
FLYBYU
VIP Member
HAUCK PERFORMANCE HAS THEM AND SAYS I THINK 6 HP MID AND A COUPLE ON TOP END.
vmaxjohn
New member
It's kinda funny, but whenever I open the hood of a 500 with a triple owner watching, they almost always inquire about the factory boost bottle. I think if Yamaha thought the triples needed it, it would be in there.
I think it's fairly proven though, that with certain mods like pipes, etc, the boost bottle does help. I do forget now what the consensus was, since I have yet to own a triple...MrSled, ya there?hehe
I think it's fairly proven though, that with certain mods like pipes, etc, the boost bottle does help. I do forget now what the consensus was, since I have yet to own a triple...MrSled, ya there?hehe
FLYBYU
VIP Member
BOOST BOTTLE
I'VE SEEN HOW PAT HAUCKS SLEDS RUN AND I THINK ALL HIS SRXS' HAVE THEM. IT'S ON MY CHRSTMAS LIST.
I'VE SEEN HOW PAT HAUCKS SLEDS RUN AND I THINK ALL HIS SRXS' HAVE THEM. IT'S ON MY CHRSTMAS LIST.
I have run them on my SX-R 700, on a single pipe they really work great....it widens the power ban and slams more fuel in at midrange....no real gain on the top, you may 2hp on the dyno , but most of that is from straight boots that you add for the tube. You can reed more about it in the Tech Pages.
jwiedmayer
New member
I have one on my sled, it helped a low-mind range bog that I could not get rid of and there a lot less spit back in the air box now. There was little difference in the seat of the pants feel though.
http://mypeoplepc.com/members/jwiedmayer/sitebuildercontent/sitebuilderpictures/dscf0008.jpg
http://mypeoplepc.com/members/jwiedmayer/sitebuildercontent/sitebuilderpictures/dscf0008.jpg
srx600
New member
boost bottle with reeds
does anyone know if the bosst bottle would work well with v force reeds or just scrap the reeds and put the boost bottle?
does anyone know if the bosst bottle would work well with v force reeds or just scrap the reeds and put the boost bottle?
srx600
New member
boost bottle
are any jetting changes needed with the boost bottle?
are any jetting changes needed with the boost bottle?
Snowmark
New member
boost bottle
got two rides in with Hartman's bottle/reed spacers, much better throttle response and mid power, engine revs to peak rpm instantly, the bog around 5000 rpm is gone, crisp, I'm very happy with it, one more piece to the puzzle. I use the carbon tech reeds, also had Hartman recut the head and slp triple pipes, big improvement over stock.
got two rides in with Hartman's bottle/reed spacers, much better throttle response and mid power, engine revs to peak rpm instantly, the bog around 5000 rpm is gone, crisp, I'm very happy with it, one more piece to the puzzle. I use the carbon tech reeds, also had Hartman recut the head and slp triple pipes, big improvement over stock.
when I put my boost bottle on , Had to rejet, but they all are little different so I am not going to give a spec on this.....to risky