Skid Questions on install.......

[WEATHERBY460]

How do i get the last bolts in the skid, in the rear. I am about 2" away. The skid need to go about 2" foward to line up with the mounting plates in the frame. All the other bolts are in and the track tension is loose. Also, should the bolt/nut combo located on the bottem below this, if loose, the rear shock pivots....should that be tight or loose?


V-max 4 92 skid

 

[jkenosh]

loosen up the limiting straps is what works for me

 

[WEATHERBY460]

here is a picture.

also...the screw/nut above the orange handle...should that be tight or loose?

Thanks for any help....so close

 

[TopGunnSrx]

Remove the middle bolts and try the rear first, and then the middle ones last. That usually works pretty good.

Fronts-Rears-Middle

 

[Sledsquatch]

I used a ratchet tie down to compress the suspension so I had more play on the track to move the skid around, worked like BUTTA for me.

 

[yammy]

take bolts out of the end of the transfer rods. she line right up for ya!

 

[maxdlx]

That skid has no transfer rods. You can release the rear strap seen in the pic, line up yhe bolt hole and then compress the skid to reattach the strap. Maxdlx

 

[mulderdad]

Ratchet strap the rear spring to compress it and it should line right up.