MountainMax
New member
Hey guys, can someone show me a pic of the outter waterpump seal on their wr, or share info. I have an 06 450 and changed the outter seal, the stock one, from what i can remember, came out with the flat side facing me, but the book says to put the words/numbers on the seal facing inward, i done it that way and the bike immidiately filled up the oil level with coolant, not good. Others on other forums say i put it in the correct way, but I don't think I did, obviously. can someone help me out here please....
ExpertXViper
New member
Are you looking for a real pic?????? I can supply pics/copys out my Service Manual for my 05, thats the best I can do as I have no plan to take mine apart.
MountainMax
New member
Yeah, if someone had one apart, the manual pic sux, im trying to figure out which way to put the spring part of the 2 seals.....
9801srx
Member
sounds like you put it in the right way. i did one on a yz 426 a month age and the inner seal had the spring facing inward and the outer had the spring facing the washer and impeller . make sure you never damaged the bore or seal when installing.
MountainMax
New member
Thanks.......