I bought a set of 8BU-00 weights from the dealer here, the 8BU's are 48.7 grams and the ones that I bought are weighing in at 50 grams do I grind off some material or use them with lighter rivets this is for a 2000 SRX that going to be grass dragging in a couple of weeks
By what the guys on here are suggesting I run a 4.5 tip and .8 middle to work is this still right even if these weights weigh in at 50grams
OR
3.1 tip and 3.1 inner like Tonys Setup
By what the guys on here are suggesting I run a 4.5 tip and .8 middle to work is this still right even if these weights weigh in at 50grams
OR
3.1 tip and 3.1 inner like Tonys Setup
Last edited:
YAMMIEGOD3:16
Active member
ANDY I JUST TESTED THEM HARD ON THE GRASS THIS WEEKEND IN MY 2002 SRX. ONES I WAS USEING WERE 55.GRAMS. MY NEXT TEST IS TO DROP DOWN TO 52 GRAMS. SLED I TESTED AGAINST WAS A 2000 MACH Z 800. WE WENT 2/2 IN RUNS. MY SRX WAS ROCKET SHIP OFF THE LINE, GREAT MID BUT SEEM TO UNDER REV AT 500 F/T CONE. THIS WAS WITH 51/39 CAM. 3:16 (yammie tony)