Yamanewf
New member
Looking for a starting point for jetting and clutching for Hauck tripples on a 600. I have 8ABs, 8DN10s, 8CHs, green & silver seconday springs, a bunch of primary springs 43, 47, 50/42, 48/34 & 51/45 helixs and lots of time. Also if anyone has a set of heelclickers they would like to part with I wouldn't mind trying those either.
Thanks
NEWF
Thanks
NEWF
cajones2
Member
What machine are you installing the pipes on? Are they the hushers from Aaen or Simmons? Can you upload a pic of them? I have a set of the simmons triple pipes along with the installation manual from hauck and some information i can forward along to you if you'd like to shoot me your email. -Craig
Yamanewf
New member
04 Venture 600. I did not know that aaen made those pipes too. I don't have them yet so I cannot post a pic. But if you have one to show me I may be able to tell. Email is scottymac400@hotmail.com
cajones2
Member
I can't tell you what year hauck switched to Aaen, I just picked that up on some of the other discussions. I am sure some of the guys can tell you when and why that happened. I just sent you some information via email. -Craig
Yamanewf
New member
Thanks man I really appreciate it.
Yamanewf
New member
The pipes are the same as yours (I just saw a pic in an old thread) so I guess they are Simons.
cajones2
Member
That's cool, then all that stuff i emailed you applies. My application is with the BB Kit, but I think if you search the forum, you should find a decent clutch setup for it too. Let me know if you need anything else. Thanks!