Concept Carbon
New member
For everyone whos lights dim. I removed my mag rotor and beed blasted all the rust off and now there is know dimming at all lights have never been so bright. 
With my lights before when ever i would let off the throttle they would dim down quite a bit. I thought I was going to have to replace the stator. Sled also seems to start alot easyier.
With my lights before when ever i would let off the throttle they would dim down quite a bit. I thought I was going to have to replace the stator. Sled also seems to start alot easyier.
daman
New member
Yep that would help sure,,thanks for posting your fix it'll help others. 
Hmm this I would like to try,would a light sand blasting work?I don't have access to a bead blaster but my cousin has a cabinet sand blaster with fine sand in it.
Concept Carbon
New member
I would only use glass beeds as they wont remove any material sand will. But its on a steel part so it should be ok try on the out side first and see if it digs in far. Some 220 grit sand paper and patience would help.
Last edited:
PhatboyC
New member
Any pics? I don't know where my mag rotor is.
staggs65
Moderator
#2, behind the recoil, on engine
PhatboyC
New member
Oh I see. Not just a maintenance item. The silencer and a bracket would have to be removed first.
When I bough my SRX I immediately put a LED bulb in the rear. As I was reading here that when the brake light is engaged the lights dims. Wonder if it's because of this or if its normal. I know I don't have any dimming issues with the LED back there but I don't even know if I had any to start with. LOL
When I bough my SRX I immediately put a LED bulb in the rear. As I was reading here that when the brake light is engaged the lights dims. Wonder if it's because of this or if its normal. I know I don't have any dimming issues with the LED back there but I don't even know if I had any to start with. LOL
rusty mag
I have a week spark issue. There is a lot of rust on my mag, wonder if that's whats going on?
I have a week spark issue. There is a lot of rust on my mag, wonder if that's whats going on?
j33p1n said:
Have others in the past explain that they had cleaned the surfaces(magnets) on the flywheel and they had spark like never before. You may wnat to pull the flywheel(rotor) and check, if there's rust there then you know that is mostlikely your problem.