little help with 98 srx 700 please

[cummins6.7]

i cleaned the carbs yesterday one of the pilots was completely clogged, got that all straightened out and topped it of with fresh gas. i started it and let it warm up for about 5 minutes. it idles and revs just fine, it starts to bog at 4500 and will not rev higher than 5200 even with the track off the ground. i returned all the carb settings to what they were at last year, im just stuck now, any thoughts or suggestions would be greatly appreciated.


thanks in advance

 

[YA*AM*A*HEAD]

thors kicking in ,,,,,unplug the 2 brown wires in the top of carb and plug them into them self on harness end and carb end ...and see it that does it

 

[cummins6.7]

yep i did that last year so thats not it. i should have mentioned that in original the original post

 

[kirk700 srx]

You say it was a 98! I had the same problem last year, I hauled the whole motor apart to see if the crank update was done which it was. Turned out to be the stator It tested ok but I changed it and no more bog. Is it like a misfire? Almost seem like it not firing on all cylinders?