viper rear bumper ??? pic
- Thread starter hereismylife
- Start date
MountainRx1
New member
I believe the one that came on my 02 MM looked like that and was black, didnt have the reflector though. You could just get a silver one and paint it black as well. I'm going to cut that little bar off the bottom of the bumper on my Viper Mtn I just picked up, it's all bent, and looks terrible.
The bumpers I used when I extended and put 144s on our SXs + SRX look like that , except they are black.
-2001 Mountain Max
-2001 Mountain Max
Joe
It always amazes me that you have questions about your sled but you never ask the guy that built it. I believe your bumper is off either a Mountain Max or a Mountain Viper. If it doesn't have that little bar underneath to help support the snow flap then that's cause I cut it off.
PS: What happend, you got rear ended by your son?
Madmatt
It always amazes me that you have questions about your sled but you never ask the guy that built it. I believe your bumper is off either a Mountain Max or a Mountain Viper. If it doesn't have that little bar underneath to help support the snow flap then that's cause I cut it off.
PS: What happend, you got rear ended by your son?
Madmatt
hereismylife
Active member
No I did the ops myself. we had them all parked and I left it in reverse. There is no beeper for the reverse. I was 6" from the wall I parked at. Well I gave some throttle and hit the poles we were backed up against in our driveway 
.
Now it has a ding in it so I need to replace it now. It just pisses me off.
My son has the same problem.
We both don't have the beepers and I am going to get them to work somehow.
I like the beep feature.
.Now it has a ding in it so I need to replace it now. It just pisses me off.
My son has the same problem.
We both don't have the beepers and I am going to get them to work somehow.
I like the beep feature.
Beeper
Man that sucks. I've done that before too but I never hit anything. I might still have that beeper but I'd have to do some digging. Probably the best thing for you to do is take it off the 97 you just blew up and just install it on your viper. The little switch just bolts on the reverse linkage and the rest plugs in. Very simple.
Madmatt
Man that sucks. I've done that before too but I never hit anything. I might still have that beeper but I'd have to do some digging. Probably the best thing for you to do is take it off the 97 you just blew up and just install it on your viper. The little switch just bolts on the reverse linkage and the rest plugs in. Very simple.
Madmatt
hereismylife
Active member
From what I noticed there is the little switch you are talking about and the peeper speaker then it is good to go.
I think that is it anyhow.
I think that is it anyhow.