lowmilevmax
New member
I just got a free set of usi skis from a buddy. I believe they were off of an 01 ZRT 800. question is the aluminum saddle isn't as wide as the steel ski that is on it. so can I remove the spacers and cut the collar down to fit. I have read the tach on this mod and they cut down the collar but that is for a viper ski. so is this possible.
thanks Jason
thanks Jason

super1c
Super Moderator
Dont see why it would be any different. I did the viper ski mod to my vmax and love it. Just cut the collars down and add or subtract spacers till it fits. Good luck and post some pics of what you come up with.
Bluenote
New member
I put on skis from a 700 Crossfire, and all I had to do was bend the aluminum a tad and they work awsome on the trail, but in powder they are just snow plows. 

lowmilevmax
New member
good to know it shouldn't be hard to do. I did notice that it is missing a sleeve that goes into the saddle where the bolt goes through. does anyone know where to get one or do I need to call USI