filo_bedo
New member
Hi Guys
I have a set of the transfer rods that is shown in the second picture installed on my sled. The bolt that holds the lower bracket sheard off my sled and I have lost the bushing. I am not sure who makes the transfer rods on my sled as they were already installed when I bought the sled used. Any help on the P/N or size of the bushing or where I can buy a replacement would be greatly appreciated!
The 1st picture shows where the bushing goes on a different style Transfer rod.
I have a set of the transfer rods that is shown in the second picture installed on my sled. The bolt that holds the lower bracket sheard off my sled and I have lost the bushing. I am not sure who makes the transfer rods on my sled as they were already installed when I bought the sled used. Any help on the P/N or size of the bushing or where I can buy a replacement would be greatly appreciated!
The 1st picture shows where the bushing goes on a different style Transfer rod.
go to the dealer they have em! they should all be the same
filo_bedo
New member
But are transfer rods stock from Yamaha? I thought they were an aftermarket addtion?
I've got a set of those and yes they are aftermarket, bender I believe. But they do use stock bushings....
600srxman
New member
they look like the bender one !!!