snow3
New member
I just bought a team secondary clutch off of a guy for my viper. He was running it on a stock machine, I have a bender tripples kit. My question is should I be running the same spring and helix as him, or what should I be running.. I also have Heavy hitters in my primary.. Thanks in advance..... 
**sj**
Life Member
team
My suggestion as being a previous owner of one is to run the shallowest angles possible....like 44/36 if that's possible
My suggestion as being a previous owner of one is to run the shallowest angles possible....like 44/36 if that's possible
Brad
New member
- Joined
- May 23, 2003
- Messages
- 403
sell it it's to heavy and wont work as good as the stock yamaha can
Harvey
New member
I am running one in my 02 SRX,think it has a 54/38 helix in it or very close.It pulls great,dont know how close a viper setup would be to an SRX.I have 2 other helixes and springs to try this winter that came with mine when I bought it.Harvey
snow3
New member
Please guys!!! Someone on here has to have had experience with a roller on a piped viper......