looking for clutch set up sxr 600 help turk

warx22

New member
Joined
Jan 5, 2010
Messages
86
Location
parrysound ont
i have a 2000 sxr600 and i have been searching forever and cant find much on this sled . my set up is stock it eng,s at 3800 and wot is 8200 whats a good trail-lake set up ? and i still want excellent take off but dont want to sacrifice top speed toomuch. going to the city tomorow to buy what ill need any info and how set up performs ????? thanks this site rules.
 
99 SX600 Trail


51/43 Helix, 8-ca weights 0.8g in tip, 2-3 engagement shims, stock spring primary, silver secondary, 1 or 2 layers removed from head gasket and 20/40 gearing. Jetting: 140 mains
 
those are for the 2 cyl models. I have not played with 2 strokes in 5-6 years. Just get rpm,s up to 8500 & call it a day. This is the 1st 600 triple i ever saw that is underevvin. Should not happen unless clutching has ben tweaked.
 
Turk said:
those are for the 2 cyl models. I have not played with 2 strokes in 5-6 years. Just get rpm,s up to 8500 & call it a day. This is the 1st 600 triple i ever saw that is underevvin. Should not happen unless clutching has ben tweaked.
should i just add some shims
 
totally stock

daman said:
post your clutch set up primary and secondary,all of it we need that info to help.
primary y g y 8dg /10.3 & 13.9 rivets i asume are stock not sure just got sled this year but been driving since 04 was the bosses sled never touched clutches secondary red spring wrapped 80* 47*helix
 
Your sled should overrev like crazy with that set up. Somethings up.
 
impossible to diagnose the possible issues you may be having on the internet.Clutches been cleaned lately?
 
Turk said:
impossible to diagnose the possible issues you may be having on the internet.Clutches been cleaned lately?
no i dont think its been done since i cant remember . doing that this weekend so i would like to have parts on hand cause i was planning to rebuild them both this summer
 
Make sure your carburetors are clean,,, pull jets, clean with wire and carb cleaner and blow out passages,, fresh plugs BR9es gaped at .028...
 


Back
Top