dirtjumper895
New member
Well its looking like im heading on out to Cooke City, MT to ride end of February. As this is my first outwest trip on a sled, I am looking to see what i should do to my current jetting and clutch setup, to atleast get me close.
Current Jetting/Clutching are real close for 0-20 degree temps at 500-1500 ft of elevation.
Current Carb Setup is
MJ 160
PJ 45
FS 1 1/2 turns out
Needles in 4th Position
Mods are
12:1 Speedwerx Billet Head
Speedwerx Ceramic Coated Triples
Clutching setup is
8EK weights, 4.5 inner, 3.6 outer,
yellow/white/yellow Primary Spring
Stock Secondary Spring, wrapped to 80.
Stock Bv51 Striaght cut 45Deg helix
Gearing is 20/40
Current Jetting/Clutching are real close for 0-20 degree temps at 500-1500 ft of elevation.
Current Carb Setup is
MJ 160
PJ 45
FS 1 1/2 turns out
Needles in 4th Position
Mods are
12:1 Speedwerx Billet Head
Speedwerx Ceramic Coated Triples
Clutching setup is
8EK weights, 4.5 inner, 3.6 outer,
yellow/white/yellow Primary Spring
Stock Secondary Spring, wrapped to 80.
Stock Bv51 Striaght cut 45Deg helix
Gearing is 20/40