Can question

SX_SLAYER

SX_SLAYER

New member
Joined
Jan 25, 2008
Messages
346
Age
30
Location
Alexandria, Minnesota
quick question, i have a bender race can on my SX 700, and i was wondering, do all the cans sound similar?? which is the loudest? which is the questiest, but still sounds good? please no "stock sounds best"
 
The stock can with a two inch hole drilled up through the bottom of the outlet into the baffle. It is quieter than an aftermarket can, still sounds horney and picks up a few horse power.
 
If you are going to play with the exhaust system, there is only one way to go in my opinion..... ;)! ;)! ;)!

Best sound and HP.

Nick
 
mbrp is loudest, sounds wierd around 7000 rpm tho. sno stuff is nice real high sound. and so is bender. stick with bender, great stuff and nice nice sound
 
Sno-stuff is by far the loudest, even louder than an mbrp (I have had both). It's a sweet sound too, very aggressive. It's been my favorite but since sound laws are heavily enforced in Ontario I have resorted to the stock can.
 
sno stuff is definetly by far th eloudest but they say we lose horses with cans so i dont even run them i do th e2 inch whole mod too stock now you dont lose weigth but you dont lose horses either
 
bluebandit98 said:
sno stuff is definetly by far th eloudest but they say we lose horses with cans so i dont even run them i do th e2 inch whole mod too stock now you dont lose weigth but you dont lose horses either
Click to expand...


I have the Sno Stuff on my 700 and it goes alot better then it did when it had a stock can, this is on a GPS, so it cannot be a lie. I know this is a beaten to death subject as well. Just my experiance.

I have yet to find one rider who dislikes the sound of my tripple with the sno stuff can. Plus I lost a lot of weight and gained a lot of room.

You all have to remember though, different temps etc all have a factor in the noise lvl.

As for noise laws, I can kitty it past houses at night and not make a racket, and even though if we wanted we could run straight pipes here on our trails. Just common courtousy.
 
Triple X said:
The stock can with a two inch hole drilled up through the bottom of the outlet into the baffle. It is quieter than an aftermarket can, still sounds horney and picks up a few horse power.
Click to expand...

Where do you find a 2" hole saw long enough to reach up in there? LoL
 
If you afraid of cutting up your original can , I still have my original one uncut and is in near mint shape. Just in case you do not like the sound.
 
You must log in or register to reply here.


Back
Top