I have a 1998 Vmax sx. I bought it right, with a bad jug. I also noticed now that I have a crankcase full of water. I am sure that the bearings are now bad on the crank.
Couple questions.
Am I correct in assuming that the crank would need all new bearings?
If so, I found a crank for a 1995 vmax 600. THe pieces all say they are the same when I looked them up on the site. Will this crank work.
I have had good luck with the 4 stroke forum with some very smart people responding. I appreciate your help in advance.
Couple questions.
Am I correct in assuming that the crank would need all new bearings?
If so, I found a crank for a 1995 vmax 600. THe pieces all say they are the same when I looked them up on the site. Will this crank work.
I have had good luck with the 4 stroke forum with some very smart people responding. I appreciate your help in advance.
daman
New member
from what I'm seeing from the parts fiche there different,,some missing parts and the outer bearings look different.
stick with 98-99
stick with 98-99
Is there an online source to find parts fiche I have a 97sx600 I hate calling the dealer ship to get part numbers
daman
New member
bluebandit98
New member
i have a 1998 vmax 700 bottom end with cases with a clutch but the clutch has a chip i jus have it for aback up
Its my understanding that the cranks are the same just the outer bearings are different
daman
New member
if you bring up the two fiche with these cranks and pan back and forth there's a piece or two different between them plus the outer b. so dunno...mtnmaxman600 said: