fishbone
New member
Hey guys. I'm looking for some educated answers that I've come to enjoy from this site. I hope this topic hasn't been beat to death, but.. what experiences have any of you had with this racelogic do it yourself porting kit? Are the results as good as I've read? And secondly, what do you guys prefer for 2 stroke engine assembly lubricant? (2 stroke oil... synthetic... mixed gas??) Thanks guys. Meet you in the drifts.
FuzzButt
New member
I can only comment on the oil choice. When I re-assembled my motor I used straight yamalube on all the bearings and surfaces. Breaking in the motor I used a premix along with the regular injected oil. Somewhere near a quart to the 11 gallons that was in the tank. Sure ran like crap with all that oil in it though. Normally when I am motoring down the trail nearly anything that is TCW3 rated is good enough. Right now it's what I have left of the regular Yamalube. When I am out of that I think I'll be switching over to Havoline's 2 cycle oil.