Concept Carbon
New member
So Here is my setup hcs
I have
9grams tip
center empty
6.3grams heel
50/42 dalton at 60deg
23/38gearing
So when I go from a stop it revs up emidiatly to 8500 climbs so 8550 then drops smoothly to 8100 and climbs. Im seeing 120mph-123mph on speedo.
I would like it to rev 8300 out of the whole and climb.
Would I be better off going to a 52/40 helix which should get me close or removing some tip weight and adding center weight?
I have
9grams tip
center empty
6.3grams heel
50/42 dalton at 60deg
23/38gearing
So when I go from a stop it revs up emidiatly to 8500 climbs so 8550 then drops smoothly to 8100 and climbs. Im seeing 120mph-123mph on speedo.
I would like it to rev 8300 out of the whole and climb.
Would I be better off going to a 52/40 helix which should get me close or removing some tip weight and adding center weight?
i think u should add some in middle .....................
Concept Carbon
New member
Will center weight lower inital rpm??? everytime ive tried weight in the center it seems to bounce around (shift)
Take some out of the heel & tip add to centre. Your heavy loaded heel is pulling from the tip on top & mid & vice versa. I would take out 2 grams from heel, 3 from tip & add 4 grams to inner for starters.
Concept Carbon
New member
Would it pull harder out of the hole with center weight? Will I loose on top end?
If you balance everything just right you will have a full steady shift right to top end ....but it,s gonna take some trial & error.
Turk said:
this is what i try to tell u lolll
are you using stock rollers?
Concept Carbon
New member
BETHEVIPER said:
nope 15mm
will u go somewhere during the week or next weekend
Concept Carbon
New member
I will be going to low on sunday and ice fishing satarday morning and looking to do some rideing on satarday night, unfortunatly I broke the bolt that holds my rear shock in my edge skid. I have my fingers crossed that I get it by the weekend. Its a stupid polaris bushing/nut sholder bolt.
stop fishing dammit we need to do a ride loll
Concept Carbon
New member
If i get my parts I may head to the bay one night this week for tunning.
let me know my dad live just beside easier to do things
Concept Carbon
New member
lol I was there when he showed up with a flat tire, we could hear him coming for miles away lol.
Concept Carbon
New member
Back on topic, lets say I moved all my tip weight to the middle would my rpms reverse. for a short drag race.
don't move all just some of it :-p....
Concept Carbon said:
yeah so crazy sometime lolllllllllllll
Concept Carbon
New member
modsrx said:
I know that but just currious of what would happen