Harvey
New member
I just purchased a set of these to put together another complete clutch setup.this is for my 02 SRX.Right now I have heavy hitters in my primary with a max performance purple spring and a team secondary with a 54-38-46 helix installed,not sure of spring color without taking it apart.I like the setup but it seems to be lacking on top end with stock gearing(any suggestions?)Now for my other setup I am going to install the 2-speed weights in another primary and setup my stock secondary with I dont know what yet,looking for suggestions.I see guys suggest straight helixes,and guys suggest multi-angle.I will purchase a new helix from dalton if need be once I get an idea what I need.I have the following yamaha helixes 8bv-10,30,70,and71 I believe they are 41,43,and 47 degrees.for bender helixes I have 2070,9970c,9870c.I also have a dalton 54/46 that I ran with the hitters before installing the team secondary.For primary springs I have a w/w/w a y/w/y and the max perf purple.for secondary springs I have the red,green and silver.Sled is pretty much stock other than carbon fiber reeds,cold air kit(think I am going to remove this)and 8" rear idlers,5.35 idlers in the other 6 positions.192 woodies in stock track with TS-3 transfer rods.Lake riding mostly,radar runs,some trail riding.any suggestions are appreciated.-thanks-Harvey
Last edited: