yamahadanik
New member
Is there any degres for the heel clickers for a sx viper ? i saw some people talking about 40-10 i dont know what is it? Is there only one kit of heel clickers for a viper? im doing trail is this a great add on whit a new helix? other question ' can any yamaha heel clickers fit or a have to get one specialy for sx viper?
Check these charts. You may find your answer in here
http://www.totallyamaha.com/snowmobiles/AAATuning Chart/Tuning_Chart.htm
http://www.totallyamaha.com/snowmobiles/AAATuning Chart/Tuning_Chart.htm
yamahadanik
New member
nop, this doesn't help me
HC40-10's are the ones you want. Means 40grams in the main section with 10g heel. Work good when set right, nice corner to corner and i out pulled and saw 172km/h on dream meter against a cat 800 triple.
red spring from the kit 4g heel(screws and washers) 3g tip and a 48/34 helix works well, or of top speed is not totally nessary a 04 rx1warrior helix can be made to work.
red spring from the kit 4g heel(screws and washers) 3g tip and a 48/34 helix works well, or of top speed is not totally nessary a 04 rx1warrior helix can be made to work.
yamahadanik
New member
ok bud this helix 48/34 is a good one? which spring on secondary drive and what degres? the setup you told me is good for acceleration, kickback and top?