shanesz28
New member
Just got a 00 SRX 700 made a gear change and was wondering how to set the chain tension, cant remember turn adjuster as far as possible with fingers then back off 1/8 of a turn? i think thats how but cant remember
daman
New member
Finger tight,dont back off.
Mac
Member
Controversial Topic
Their are different opinions on this topic. I back off 1/8 to obtain slack in the chain. Otherwise it feels banjo tight if I don't back off. I also use trans fluid. Never a problem. Please read DISCLAIMER.
Disclaimer: No information or material provided should be considered fact unless approved pending member approval. This is my opinion only. The opinions of others should not be discounted. The correct method must be accurately obtained BLAH BLAH BLAH.
Their are different opinions on this topic. I back off 1/8 to obtain slack in the chain. Otherwise it feels banjo tight if I don't back off. I also use trans fluid. Never a problem. Please read DISCLAIMER.
Disclaimer: No information or material provided should be considered fact unless approved pending member approval. This is my opinion only. The opinions of others should not be discounted. The correct method must be accurately obtained BLAH BLAH BLAH.
daman said:
X2........
ryanryan
New member
Netefrog said:
What is in your avatar pic, I see it says ski-dont, but something looks weird with the left sled???
ryanryan said:
LoL. It's a pic of a Ski-Doo with it's pistons coming out of the hood.
staggs65
Moderator
i think those pics said BRP bring rings & pistons too
staggs65 said:
Yep, or BRP=Bring Rope Please.
