red rider
New member
My 03 viper does not idle smoothly. If I raise the speed it goes to 4000. When i back it off it drops to 1200 and loads up. I can not get it to run between those ranges. I have noticed fuel in the air vent lines to the air box.
Could it be the floats are set too high causing the fuel to back up and out these lines? I have checked the levels, but am unclear to whch way to adjust if neccessary and how to accurately verify the settings.
Could it be the floats are set too high causing the fuel to back up and out these lines? I have checked the levels, but am unclear to whch way to adjust if neccessary and how to accurately verify the settings.
Millinocket Rocket
New member
I would start by cleaning the pilot jets-- make sure you can see clearly through all the little holes.
red rider
New member
All jets have been inspected and cleaned.