A/M thumb warmer elements

[fourbarrel]

Has anyone tried to glue one of these aftermarket thumb warmer elements to the back side of a stock throttle lever?I just bought a lever off Ebay to replace the one on my SRX as it wont heat at all,and yes I used my ohm meter to verify the element is toast.This will now give me 2 spare throttle levers with junk heater elements and I was wondering today if I could just buy an A/M one and glue/epoxy it onto the back of one to give me a completely usable spare.

 

[super1c]

I got one laying around from my 02 viper. From the parts manual it looks like they are the same. When i took it off due to a cracked throttle block it worked just fine. Send me a pick of the end that hooks to the wires and if its the same ill send it to ya free. Pm me the picks or Pm me for email address. Thanks CCC

 

[super1c]

Fourbarrel its on the way!!!!! CCC

 

[fourbarrel]

That is great.One more reason why this is THE best sledding site on the web,people helping out others for no other reason than to help out.You are a real gentleman my friend.