Bender roller secondary

C

crazykid

New member
Joined
Nov 21, 2004
Messages
238
Age
49
Location
WINNIPEG MB
Does anyone run one of these? How do these perform on an srx or viper both are 780"s. I have a chance to pick one up, with the following angle helixs, 52/46, 56/40, a straight 49 and a straight 51. Is this indeed a Bender Roller Secondary? Let me know if any of you think it could be a good addition to any of these sleds. Thanks
 

Attachments

  • bender.jpg
    bender.jpg
    11.5 KB · Views: 159
Last edited:
My uncle has one with the roller 2 with a 49/43. Also has heel clickers in primary and I must say it has over 12000 kms on the sled and was the fastest best clutching setup srx I have ridden. I was very impressed.
 
That is not the bender roller rooster made by advant-edge.It looks more like a max performance roller.
 
it is a max roller , and from my experience angles are out by 10 degrees @ least benders , i run a rooster , on my 600 angles are 39/35 , compatible to a 49/45 so to speak . they present a lot more rotating mass , they are high maintenance and the rollers are big bucks , unless you can get a line on some from someone ... The backshift is quicker and smoother it seems on the trail , is it better then a well clutched stock set up , probably not ,
 
K thanks, ya just saved me a few dollars, appreciate it alot. Kinda wondered why he would be selling it if it was a GOOD addon, should have followed my instincts. Thanks again.
 
yammieguy said:
Do the bender rollers use a cat helix??I have one here that says maxx on it so I am guessing it is a maxx perf one, do they use cat helixes??
Click to expand...
the old style maxx ones use cat and the news maxx is different. here is my maxx roller i have it uses cat helixs.
 

Attachments

  • 100_2839 (2).jpg
    100_2839 (2).jpg
    194.1 KB · Views: 4
  • 100_2842 (2).jpg
    100_2842 (2).jpg
    176.4 KB · Views: 1
  • 100_2845 (2).jpg
    100_2845 (2).jpg
    217.3 KB · Views: 2
have 2 say this roller clutch will out perform a button clutch any time of day and u can take that 2 the races allso , and the roller is the only thing that works in the deep snow properley, its only common sense less friction, u going 2 tell me ur button clutch is better, not in a 100 years maybe ur problem is u can,t clutch a roller. now i,ve vented off, much quicker back shift which u want in the deep snow. and for drags use a straight cut helix. and u can figure out what spring u use in a rooler as thats the key for them 2 work properley, but then again if u know what ur doing u should be able 2 figure that one out. AL
 
I have 15 years experience with roller secondaries & they all work differently. Not a good idea to put one in the hands of an inexperienced clutch tuner & have him spend 1-2 winters chasing his tail figuring stuff out.
 
MAN AL YOUR COMPAREING A ROLLER TO THE STOCK YAMAHA SECONDARY FOR DRAG RACING ? WOW SURPRIZED. ALOT OF GUYS OUT THERE HAVE GONE REAL FAST WITH THAT STOCK SECONDARY. HARD TO BEAT THEM. 3:16 (yammie tony)
 
You must log in or register to reply here.


Back
Top