Scherbers4
New member
Hey guys I am trying to see what size track I have. I need to know if I measure just the lugs, or from the bottom of the track to the top of the lugs. This is all so I can stud my track. It is a Predator track.
Proper way to measure lug height is from the top surface of track to the top of the lug.
Om a 1 1/4" Ripsaw some lugs are 1" and the highest ones are 1 1/4".
Bob
Om a 1 1/4" Ripsaw some lugs are 1" and the highest ones are 1 1/4".
Bob
super1c
Super Moderator
From face of track to tip of lug. Track thickness not included. Dont forget track maybe a bit worn. Is it stock track? CCC
super1c
Super Moderator
Woops, got me bob. Was sleeping at the key's. CCC
Hey...got to love the back up! None of us are always correct...LOL! even though we may think we are!!
Bob
Bob
Scherbers4
New member
Thanks for the help
Got it guys .875 Predator time to stud. Should I do anything else to protect my tunnel, before I stud that is?
Got it guys .875 Predator time to stud. Should I do anything else to protect my tunnel, before I stud that is?
SRXSRULE2
New member
If you have tunnel protectors you should be fine... If not I would get a set as heat exchangers are not fun to change besides the cost and the fact it could leave you dead in the water.