Camoplast Predator 9833/9818

0

09xtxrider

New member
Joined
Nov 13, 2010
Messages
21
Age
34
Location
Rochester Hills, Mi
Where is the cheapest place to buy this track?

Cheapest I have found is tracksusa for $339

Also, the 98 srx, does not have the heat exchangers right?
So the 1.25 inch track will have no problems?
 

srx all have heat exchangers 1.25 will clear if you add studs you need protectors expect to gouge the fins some , better off with 1 inch track and 1075 studs . also if this is the cone track do yourself a favor and get something else that track is garbage and it feels like your on ball earings .
 
harness racer said:
srx all have heat exchangers 1.25 will clear if you add studs you need protectors expect to gouge the fins some , better off with 1 inch track and 1075 studs . also if this is the cone track do yourself a favor and get something else that track is garbage and it feels like your on ball earings .
Click to expand...

I remember when I went through this.....so I got a ripsaw and a 6 pitch...lol
 
I put a 1.25 fully clipped predator track on my 03 RX-1. It made a huge improvement to the sled over the stock track. It is a very durable track, put over 5000 miles on it. I am very happy with the performance of this track on my RX-1. I will be repacing the track on my 00 SRX, I am either going to the 1.25" fully clipped predator or a 1.06" fully clipped hacksaw with the factory ice picks.
 
harness racer said:
srx all have heat exchangers 1.25 will clear if you add studs you need protectors expect to gouge the fins some , better off with 1 inch track and 1075 studs . also if this is the cone track do yourself a favor and get something else that track is garbage and it feels like your on ball earings .
Click to expand...


this is so true about the cone type track ..garbage really feel like your on a ball bearing
 
j_k_auto said:
here is some reviews about different tracks

track reviews
Click to expand...

I am not a fan of the 1.25" Ripsaw, but had a 1.5" Ripsaw on my SRX and loved it, I will be putting one on my Viper when the track wears out on it. Note that I am on rough trails, powder, and absolutely hate studs.
 
did you check cb performance for price? they are in the preferred vendor section on this site.
 
I have always found WWW.SNOWCITYMI.COM to have the best price on tracks and most other clothing and parts. If it is not on there website call 517-369-2001 and talk to Jim or Scott, great guys to deal with.
 
You must log in or register to reply here.


Back
Top