BigHoss69
New member
Hey guys, I'm having some trouble getting my sled jetted. It has stock jets (145 pto, 143.8 center, and 143.8 mag, 45 pilots), but the plugs are nearly white, it barely idles, and falls flat on its face when you punch it. From my experience and knowledge, this is all a lean condition, but why from stock jetting? It has been run in temps from 30F to 5F and its always the same. The sled is bone stock, and its not sucking air from anywhere it shouldnt be. I was going to put 150 mains in it and 50 pilots, but thought id ask first.
harness racer
New member
What Circuit Ar E U Lean On (it)
goody_700
New member
Fuel pump maybe?? Just a suggestion.
