mxjeff
New member
2000 SRX with bender ts3 transfer rods. I'm trying to adjust them and can't get them to move, the sleeve slides back and forth but they won't turn. Any suggestions?
nighttrain9
New member
Push up then turn . Make note of how many lines you have so you know if you are moving it in the right direction !mxjeff said:
mxjeff
New member
They push up but won't turn. Could i be pushing them too far?
03viperguy
Moderator
they wont go in either direction? you might be at the end of adjustment if they still go in one direction
mxjeff
New member
They won't go either direction, it is currently set with 3 lines showing. They moved in the fall but won't move now.
mattyg1405
New member
put a pipe wrech on them and spray them with some kind of WD or penetrating oil
00SRXWHERRY
New member
Ya sounds like they locked up, as mattyg said use some pbblaster let it sit and try to break it loose. If you can do it in a heated area it will help.