BigTimeFarmer
New member
anyone out there have trouble fitting aaen pipes under their hood on a viper. no matter what i do i can't seem to keep the pto pipe from touching the hood. even though it was not in the instructions from hauck, i noticed that the flanges were 3 different lengths. anyone know which one goes where?
mopar1rules
Active member
i have not had issues w/the pipes hitting the hood. all my flanges appear to be the same length.
skimau
New member
I have this pipe on a srx and everything is fine but I grind a corner of a grid because he touch the pipe but the rest is ok
viperking
Active member
I have a buddy with aaen's and his don't touch the hood at all. I have a set of hauck pipes and they are close to the hood so i heat taped the hood on mine but his isn't taped and he has no problems
No melting here, oh thats right, ours is Stock and also quiet. Keep the trails open with quiet exhaust. Al
mopar1rules
Active member
Al, aaen pipes on a viper are quiet. Like a stock srx. They are not obnoxiously loud like mbrp silencers.
My cpr's are quiet to......
viper48
New member
There's always one out there!!
alswagg said:
I read the one guy said he has the same pipe and all flanges are the same... Did youjust get these pipes? I have a buddy who runs a cat and he order a set of pipes for his, however they sent him the wrong pipe for his sled maybe this is what happened to you. Also does it run well with the pipe one? Reason I am asking is because his sled went down the tube with the wrong application on his.