I was doing some tuning on the SRX today and got the carbs pretty darn good.
I was wondering if anybody else experienced this problem with the plastic carb wells that snap onto the nozzle.
They wont snap anymore and just fall right off. I got the mag side to stay on but I need to replace all 3. Does anybody have some laying around or is there anything I can do to fix these?
I was wondering if anybody else experienced this problem with the plastic carb wells that snap onto the nozzle.
They wont snap anymore and just fall right off. I got the mag side to stay on but I need to replace all 3. Does anybody have some laying around or is there anything I can do to fix these?
Attachments
staggs65
Moderator
had that happen too. luckily i had a spare carb rack. think you'll probably have to replace them.
Had that happen too. Mine slid up the tubes in the carbs and blocked the floats off, causing burned pistons. I replaced them and after a season, they were loose again. I removed them completely and have not had an issue since.