you cleared a 1.75 track with the 9 tooth drivers? maybe I won't have to change drivers then. I was hoping to use a 1.325 lug with some chisels for snow drags.needaSRX said:I just took off a 1.75 with 9 tooth drivers and still had room, so a 2" paddle should fit with 8 tooth drivers
nysrx said:When you were running the 1.75 did you remove front protectors.
I am going to be pulling the front and rear coolers out of the tunnel.BigTimeFarmer said:i know guys who have studded 1.25 tracks with 8 tooth drivers, but i don't know if the longer studs on a 1.375 will still have enough clearance or not. better find someone who's tryed it before buying anything.
With 8 tooth drivers 2 1/4" fits. It is tight.SRX700guy said:What is the tallest lug possible to run on an SRX if I use 8 tooth drivers?
Thats good to know cause I am going to be running a 1.325 Cobra track with 1.8 chisels in the track.srxhair said:With 8 tooth drivers 2 1/4" fits. It is tight.
I'm pulling the front and rear exchangers out.nysrx said:If you are going to run chisels you might want to keep protectors intact.