Viper spindle?

[super1c]

As you can see while cleaning my daughters viper spindles i noticed one is bent. Few questions. As far as i can tell from parts look up their is no right or left or difference between years for vipers. I checked everything out real well. Control arms, radius rods, i knew bottom control rods were bent (they are already fixed). Spindle caps. Anything else i should be looking for for damage that goes along with a twisted and bent spindle? Thanks chris

 

[bolin22]

rear trailing arm mount bolt could be bent.

 

[viperking]

Rear trailing mount/ bolt and the tie rod are probably about it. Shoot me pm if you need to get a spindle I have some

 

[super1c]

rear trailing arm mount bolt could be bent.

Went out and checked, everthing ok. Looks like were in the clear.