427cobra
New member
Well I WAS going to align the front end tonight.... 
But noticed excessive play at the ski saddles on both sides.
It looks like I have two options for parts to replace....two bushings inside the spindle or the metal tube that runs through the spindle. (this looks like it is stepped down on the ends.) Is that correct? Its the same on both sides.
(#32 & #14): Parts Link
Im guessing you can just pop out the bushings in the spindle with a hammer and punch.
So any ideas would be appreciated. (or are there any measurements I can take to confirm what parts are worn.
Thanks!
But noticed excessive play at the ski saddles on both sides.
It looks like I have two options for parts to replace....two bushings inside the spindle or the metal tube that runs through the spindle. (this looks like it is stepped down on the ends.) Is that correct? Its the same on both sides.
(#32 & #14): Parts Link
Im guessing you can just pop out the bushings in the spindle with a hammer and punch.
So any ideas would be appreciated. (or are there any measurements I can take to confirm what parts are worn.
Thanks!
Last edited:
Bushing driver would work the best.