viper idler wheels

pipe+viper=bada**

New member
Joined
Feb 13, 2011
Messages
12
Age
30
Location
Wisconsin
i am gettin new idler wheels for my viper old ones are in rough shape.
i found a cool set on dennis kirk the fittment says apex and nitro but the bearings are 20mm and they are 7 inch will they fit???
 
mine are apprx 7" od wheels and the bearings are 20mm id. this off an 03 mtn viper, if your referring to the wheels on the rear axle.

if your thinking the wheels at the center where the rear shock attaches, those are closer to 25mm for the id on the bearing, but the od on the wheel is still at 7".
 


Back
Top