Bore head domes?

[SXlover]

I'm working on a Kawasaki 650SX and am wondering if I bore the cylinders 1mm over if I need to do anything with the head? Or can I run it with the way it was stock?

Thanks guys.

 

[stanage]

I've never done anything to the heads when boring over, unless I find a problem with clearance. I check the clearance in the squish band, in case the new piston's crown has different dimensions. I typically check the squish with solder wire.

http://www.nrhsperformance.com/tech_squish.shtml

 

[nikamiles]

I think running it stock would be better.