Just picked up a 144 X package skid for dirt cheap. Now is the hard part, I need a donor sled for measurements unless any of you guys have had any experience with a SC3 skid. If so please post away. I am going to try and find some measurements online but if you guys have any knowledge please let me know.
A couple of bucks
VIP Member
Coles_55 said:
Do ya know if you can use the geometry off of the sled that it came from? Hole to hole....etc,etc.
No the sled was totalled bad....
A couple of bucks
VIP Member
Have you seen another around your neck-o-the-woods that you might be able to look at......private or dealer.
Ya I know one guy that has one that I was hoping to get at before he sells it at haydays....
what year and doo did it come from?
i have some friends with the 07 144 revs/summits. no problem measuring if same.
seems a bit odd that the skid was usable but the tunnel was in no shape for measures. usually one cancels the other. smacked tunnel, broke skid, vise versa.
i have some friends with the 07 144 revs/summits. no problem measuring if same.
seems a bit odd that the skid was usable but the tunnel was in no shape for measures. usually one cancels the other. smacked tunnel, broke skid, vise versa.
Idk I bought it from a salvage place....but its out of a 04.
i have dimensions for 07 and 08. dont know enough about doos to tell you the difference.
but, if those years will help, they arent far away to measure up.
but, if those years will help, they arent far away to measure up.
Idk I will get on dootalk and check it out. I finished rebuilding the skids today, all new bearings in the idlers, new bushings, and debating on whether on not to get the rails powder coated blue.....